Filtered by:
Inside The Outdoors

How to Reproof a Waterproof Jacket

21.11.2018 | Hiking

If you notice the fabric of your coat is absorbing rather than repelling water, it’s time to reproof it. This guide will show you how to reproof a waterproof coat or jacket using either a waterproofing spray or a wash in waterproofer.

 

Waterproofing Spray

How To Reproof Waterproofs

Shop Now

The Mountain Warehouse waterproof spray is an easy way to improve the water repellency of your coat.

Wash in Proofer

Shop Now

If you need to clean your waterproof jacket as well as reproofing, Mountain Warehouse Wash n Proof is for you.

 

How to Use Our Waterproofing Products

Our proofers should not alter the look or handle of the fabric. However, it is recommended that the products are tested on a small, inconspicuous area before spraying on or washing into the garment.

 

Waterproof Spray

Reproof Spray

Mountain Warehouse Spray on Proofer

Shop Now

 

A waterproof spray will help reproof your jacket to maximise its waterproofing and breathability.

Always wash your coat first if re-proofing using a waterproof spray. Dirt and oil can clog up the breathable membrane found in many waterproof jackets, making it feel as though water is penetrating through the fabric. When washing your jacket, it is important to use a specialist performance cleaner designed for technical outerwear rather than everyday household detergents.

If you’re unsure how to wash your waterproof jacket, check out our guide to washing waterproof clothing.

 

How To Use Waterproofing Spray For Coats & Jackets:

  1. Spray the product evenly on the outside of the coat from approximately 15-20 cm away.
  2. Hanging the coat on a washing line when spraying with the proofer will help maintain an even coating.
  3. Check the jacket carefully to ensure no areas of the fabric have been missed.
  4. Wipe off any excess with a damp cloth.
  5. Allow the jacket to dry naturally.

For high abrasion areas such as the elbows and shoulders, it’s recommended that a second coat of proofer is applied. Again, allow to dry naturally.


Wash In Proofer

If you want to wash your coat at the same time as reproofing, we recommend using Wash n Proof.


Mountain Warehouse Wash n Proof

Mountain Warehouse Wash n Proof

Shop Now

How To Use Wash N Proof:

  1. Pour the appropriate amount of proofer into the detergent compartment (instructions for this will usually be found on your product).
  2. Allow the washing machine to run through the complete wash and rinse cycle at 30 degrees.
  3. Heat helps to activate the product, so if the coat’s care instructions allow, you can tumble dry it on a low or medium heat.

YOU MIGHT ALSO ENJOY ...